| |
INTRODUCTION
Please consult this Guide for Authors for further details on the requirements for submitting your paper to Domestic Animal Endocrinology. The guidelines described in this document should be adhered to carefully, to ensure high-quality
and rapid publication of your manuscript.
Aims and Scope
Domestic Animal Endocrinology publishes scientific papers
dealing with fundamental, translational, and clinical aspects of the endocrinology of domestic animal species at all levels of organization
(organismal, cellular, and molecular). Those manuscripts utilizing other species as models for clinical or production problems associated
with domestic animals will also be considered. Clinical Case Reports will generally not be accepted unless the research report provides
significant new information regarding mechanisms responsible for a phenomenon. Topics covered include the regulation of hormone secretion,
hormone action, and biochemical endocrinology.
Types of Contribution
1. Original Research Papers (Regular Papers)
2. Review Articles
3. Short Communications
Original Research Papers should report the results of original research.
The material should not have been previously published elsewhere, except in a preliminary form.
Review Articles should
cover subjects falling within the scope of the journal that are of active current interest. They may be submitted or invited.
Short
Communications are concise but complete descriptions of a limited investigation, which will not be included in a later paper. Short
Communications should be as completely documented, both by reference to the literature and description of experimental procedures employed,
as an Original Research Paper. They should not occupy more than six printed pages (about 12 manuscript pages, including figures, tables
and references).
Page Charges
This journal has no page charges.
BEFORE YOU BEGIN
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics
and http://www.elsevier.com/ethicalguidelines.
Policy and Ethics
In general, authors should develop manuscripts
in accordance with Uniform Requirements for Manuscripts Submitted to Biomedical Journals. In addition, A statement should be made at
the beginning of the Materials and Methods section of all submitted manuscripts representing original research with animals indicating
that the work has been reviewed and approved by an institutional animal care and use committee in accordance with one of the following:
1) EC Directive 86/609/EEC for Animal Experiments, 2)
Guide for the Care and Use of Laboratory Animals, United States Public Health Service, or 3) Guide for the Care
and Use of Agricultural Animals in Agricultural Research and Teaching, Federation of Animal Science Societies.
Conflict of Interest
All authors are requested to disclose any actual or potential conflict of interest including any financial,
personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately
influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission
Declaration
Submission of an article implies that the work described has not been published previously (except in the form of
an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that
its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and
that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent
of the copyright-holder.
Contributors
Each author is required to declare his or her individual contribution to the article:
all authors must have materially participated in the research and/or article preparation, so roles for all authors should be described.
The statement that all authors have approved the final article should be true and included in the disclosure.
Authorship
All authors should have made substantial contributions to all of the following: (1) the conception and design of the study, or acquisition
of data, or analysis and interpretation of data, (2) drafting the article or revising it critically for important intellectual content,
(3) final approval of the version to be submitted.
Clinical Trial Results
In line with the position of the International
Committee of Medical Journal Editors, the journal will not consider results posted in the same clinical trials registry in which primary
registration resides to be prior publication if the results posted are presented in the form of a brief structured (less than 500 words)
abstract or table. However, divulging results in other circumstances (e.g., investors' meetings) is discouraged and may jeopardize consideration
of the manuscript. Authors should fully disclose all posting in registries of results of the same or closely related work.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see http://www.elsevier.com/copyright ). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions
). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and
credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions
.
Retained Author Rights
As an author you (or your employer or institution) retain certain rights; for details you are
referred to: http://www.elsevier.com/authorsrights .
Role of the Funding Source
You are requested to identify
who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of
the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in
the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please
see http://www.elsevier.com/funding .
Funding Body Agreements and Policies
Elsevier has established agreements
and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript
archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please
visit http://www.elsevier.com/fundingbodies.
Sponsored Articles
This journal offers authors the option to
sponsor non-subscriber access to their articles on Elsevier's electronic publishing platforms. For more information please view our Sponsored
Articles page at http://www.elsevier.com/sponsoredarticles.
Language Services
Authors who require information
about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/languagepolishing
or our customer support site at http://epsupport.elsevier.com for more information. Please note Elsevier neither endorses
nor takes responsibility for any products, goods or services offered by outside vendors through our services or in any advertising. For
more information please refer to our Terms & Conditions: http://www.elsevier.com/termsandconditions.
Submission
Submission to this journal proceeds totally online. Use the following guidelines to prepare your article. Via the online submission site
of this journal ( http://ees.elsevier.com/dae/ ) you will be guided stepwise through the creation and uploading of the various
files. The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review
process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source
files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests
for revision, takes place by e-mail and via the author's homepage, removing the need for a hard-copy paper trail.
Referees
Please submit, as part of the covering letter with the manuscript, the names, full affiliation (department, institution, city and country)
and email addresses of 3 potential Referees. Appropriate Referees should be knowledgeable about the subject but have no close connection
with any of the authors. You may also suggest reviewers you do not want to review your manuscript, but please state your reasons for
doing so.
PREPARATION
Language
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Use decimal points (not decimal commas); use a comma for thousands (1,000 and above).
Use of Word-processing
Software
It is important that the file be saved in the native format of the word processor used. The text should be in single-column
format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article.
In particular, do not use the word processor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts,
superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the word processor's facility. When
preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid
is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional
manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication ). Do not import
the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript.
See also the section on Electronic illustrations. To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check"
functions of your word processor.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text.
The article should preferably be written using Elsevier's document class "elsarticle", or alternatively the standard document class "article".
The Elsevier LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide:
http://www.elsevier.com/latex . It consists of the file: elsarticle.cls, complete user documentation for the class file,
bibliographic style files in various styles, and template files for a quick start.
Article Structure
Abstract
A concise
and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions.
An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be
avoided, but if essential, they must be cited in full, without reference to the reference list. Also, non-standard or uncommon abbreviations
should be avoided, but if essential they must be defined at their first mention in the abstract itself. Abstracts must be limited to
a single paragraph with no more than 2,500 keystrokes (characters plus spaces).
Keywords
Immediately after the abstract, provide
a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and",
"of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used
for indexing purposes.
Subdivision - Numbered Sections
Divide your article into clearly defined and numbered sections. Subsections
should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also
for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear
on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed
literature survey or a summary of the results. Introduction should not exceed 1.5 manuscript pages.
Materials and Methods
Provide
sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications
should be described.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the
results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid excessive citations and discussion
of published literature. Although there are always exceptions, a good rule of thumb is for the Discussion section to not exceed 5 double-spaced
manuscript pages and to limit the number of references to no more than 35.
Conclusions
The main conclusions of the study may
be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Essential Title Page Information
Title. Concise and informative. Titles are often used in information-retrieval systems.
Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous
(e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below
the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate
address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each
author.
Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and
publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the
e-mail address and the complete postal address.
Present/permanent address. If an author has moved since the work described
in the article was done, or was visiting at the time, a "Present address"' (or "Permanent address") may be indicated as a footnote to
that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript
Arabic numerals are used for such footnotes.
Acknowledgements
Collate acknowledgements in a separate section at the end of the
article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here
those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article,
etc.).
Nomenclature and Units
Follow internationally accepted rules and conventions: use the international system of units
(SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUPAC: Nomenclature of Organic Chemistry:
http://www.iupac.org/ for further information.
GenBank
DNA sequences and GenBank Accession numbers.
Many Elsevier journals cite "gene accession numbers" in their running text and footnotes. Gene accession numbers refer to genes or DNA
sequences about which further information can be found in the databases at the National Center for Biotechnical Information (NCBI) at
the National Library of Medicine. Authors are encouraged to check accession numbers used very carefully. An error in a letter or number
can result in a dead link. Note that in the final version of the
electronic copy
, the accession number text will
be linked to the appropriate source in the NCBI databases enabling readers to go directly to that source from the article.
Math
Formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line
for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently
denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the
text). Please see Additional Style Notes below.
Footnotes
Footnotes should be used sparingly. Number them consecutively
throughout the article, using superscript Arabic numbers. Many word processors build footnotes into the text, and this feature may be
used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at
the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with
a superscript lowercase letter.
Image Manipulation
While it is accepted that authors sometimes need to manipulate images
for clarity, manipulation for purposes of deception or fraud will be seen as scientific ethical abuse and will be dealt with accordingly.
For graphical images, this journal is applying the following policy: no specific feature within an image may be enhanced, obscured, moved,
removed, or introduced. Adjustments of brightness, contrast, or color balance are acceptable if and as long as they do not obscure or
eliminate any information present in the original. Nonlinear adjustments (e.g. changes to gamma settings) must be disclosed in the figure
legend.
Electronic Artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations:
Arial, Courier, Helvetica, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use
a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images
near to the desired size of the printed version.
Submit each figure as a separate file.
A detailed guide on electronic artwork
is available on our website: http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some
excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork
is finalized, please "save as" or convert the images to one of the following formats (note the resolution requirements for line drawings,
halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of
1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT:
If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
• Supply embedded graphics in your word processor (spreadsheet, presentation) document;
• Supply files that are optimized
for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
•
Submit graphics that are disproportionately large for the content.
Non-Electronic Artwork
Provide all illustrations as
high-quality printouts, suitable for reproduction (which may include reduction) without retouching. Number illustrations consecutively
in the order in which they are referred to in the text. They should accompany the manuscript, but should not be included within the text.
Clearly mark all illustrations on the back (or - in case of line drawings - on the lower front side) with the figure number and the author's
name and, in cases of ambiguity, the correct orientation.
Mark the appropriate position of a figure in the article.
Color
Artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution.
If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these
figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced
in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after
receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For further information on the
preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical
complications which can arise by converting color figures to "gray scale" (for the printed version should you not opt for color in print)
please submit in addition usable black and white versions of all the color illustrations.
Figure Captions
Ensure that
each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not
on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols
and abbreviations used.
Text Graphics
Present incidental graphics not suitable for mention as figures, plates or schemes
at the end of the article and number them "Graphic 1", etc. Their precise position in the text can then be indicated. See further under
Electronic artwork. If you are working with LaTeX and have such features embedded in the text, these can be left, but such embedding
should not be done specifically for publishing purposes. Further, high-resolution graphics files must be provided separately.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate
them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in
tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure
that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must
be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in
the text. If these references are included in the reference list they should follow the standard reference style of the journal and should
include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference
as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given.
Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references
can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations
in the text) to other articles in the same Special Issue.
Reference Style
Text: Indicate references by number(s) in square
brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
Example:
"...as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result..."
List: Number the references (numbers in
square brackets) in the list in the order in which they appear in the text.
Examples:
Note: List all authors names
and initials in all references.
Reference to a journal publication:
[1] Miller CB, Rowlings PA, Zhang MJ, Del Romeral LM,
Stillson C, Lesh M, Dae M. The effect of graft purging with 4-hydroperoxycyclophosphamide in autologous bone marrow transplantation
for acute myelogenous leukemia. Exp Hematol. 2001;29(12):1336-1346.
Reference to a book:
[2] Palmer RJ, Moncada S. Vascular
Endothelial Cells. 3rd ed. New York, NY: Science Publishers; 1996.
Reference to a chapter in an edited book:
[3] Gross SS,
Aisaka K, Jaffe EA, Botvinick E, Morimoto M.
Nitric oxide synthesis. In: Levi R, Griffith OW, eds. Biochemistry Basics. New
York, NY: Biopub Inc.; 1990:131-158.
Journal Abbreviations Source
Journal names should be abbreviated according to
Index Medicus
journal abbreviations: http://www.nlm.nih.gov/tsd/serials/lji.html ;
List of serial title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service): http://www.cas.org/sent.html.
Supplementary Material
Elsevier accepts
electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities
to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips and more. Supplementary
files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com . In order to ensure that your submitted material is directly usable, please ensure that data
are provided in one of our recommended file formats. Authors should submit the material in electronic format together with the article
and supply a concise and descriptive caption for each file. Video files: please supply 'stills' with your files: you can choose any frame
from the video or make a separate image. These will be used instead of standard icons and will personalize the link to your supplementary
information. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Additional Style Notes
Please use the following words, phrases, abbreviations, and stylistic conventions
• Do
not use the term 'significant' redundantly throughout the text. Cite a P value (recommended for Abstract and for Results) associated
with each statistical inference.
• Terms with a specific statistical meaning (i.e. significant, tended and correlated), should
only be used in a strict statistical context.
• Numbers less than 10 are written as a word, unless followed by an abbreviation
for unit of measure, e.g. five embryos, 5 min
• Abbreviate units of measure when they follow a quantity: days, d; hours, h;
weeks, wk; years, yr; minutes, min; For example, 4 d, 5 h, 6 yr.
• When using a time-descriptive noun as a name (e.g., hour
of the experiment or day of the experiment), spell out the noun.
Use the following expressions
• Estrus is a noun; estrous
is an adjective.
• 120 to 125, not 120-125
• treatment by period, not treatment X period
• gravity: 100 X
g (in lieu of speed for centrifugation)
Abbreviations
Never use an abbreviation to start a sentence (e.g, mRNA should be Messenger
ribonucleic acid); otherwise, rephrase the sentence so that it doesn't begin with the word in question. Commonly-accepted, journal-defined
abbreviations can be used without definition (see DAE-defined abbreviations below). All others should be defined in the abstract (if
used) and again the first time the term appears in the text. Thereafter, use the abbreviation.
Physical units
Item
- Unit
Bq - becquerel
°C - degree Celsius
Cal - calorie
Ci - curie
cM - centimorgan (spell out morgan
if used without a prefix)
Da - dalton
Eq - equivalent
g - gram
ha - hectare
Hz - hertz
IU - international unit
J - joule
L - liter
milliliter - mL
lx - lux
m - meter
M - molar (concentration; preferred over mol/L)
mol - mole
N - normal (concentration)
Pa - pascal
t - metric ton (1,000 kg)
V - volt
W - watt
Units
of time
s - second(s)
min - minute(s)
h - hour(s)
d - day(s)
wk - week(s)
mo - month(s)
yr - year(s)
Statistical symbols and abbreviations
ANOVA - analysis of variance
CV - coefficient of variation
df - degree(s)
of freedom
F - F-distribution (variance ratio)
LSD - least significant difference
n - sample size (used parenthetically
or in footnotes)
P - probability
r - simple correlation coefficient
r2 - simple coefficient of determination
R - multiple correlation coefficient
R2 - multiple coefficient of determination
s2 - variance (sample)
SD - standard
deviation (sample)
SE - standard error
SED - standard error of the differences of means
SEM - standard error of the mean
t - t- (or Student) distribution
? - probability of Type I error
? - probability of Type II error
?
- mean (population)
? - standard deviation (population)
?2 - variance (population)
?2
- chi-squared distribution
Others
ACTH - adrenocorticotropic hormone
ADG - average daily gain
ADP - adenosine
diphosphate
AI - artificial insemination
ATP - adenosine triphosphate
avg - average (use only in tables, not in the text)
BCS - body condition score
bp - base pair
BSA - bovine serum albumin
BW - body weight
cDNA - complementary deoxyribonucleic
acid
C/EBP - CAAT-enhancer binding protein
cfu - colony-forming unit
CoA - coenzyme A
Co-EDTA - cobalt ethylenediaminetetraacetate
CP - crude protein (N x 6.25)
d - dextrodiam. diameter
DE - digestible energy
DNA - deoxyribonucleic acid
EBV - estimated
breeding value
eCG - equine chorionic gonadotropin
EDTA - ethylenediaminetetraacetic acid
EIA - enzyme immunoassay
ELISA
- enzyme-linked immunosorbent assay
Exp. - experiment (always followed by a numeral)
FFA - free fatty acid(s)
FSH - follicle-stimulating
hormone
g - gravity
GE - gross energy
GLC - gas-liquid chromatography
GLM - general linear model
GnRH -
gonadotropin-releasing hormone
GH - growth hormone
GHRH - growth hormone-releasing hormone
hCG - human chorionic gonadotropin
HEPES - N-(2-hydroxyethyl)piperazine-N'-2-ethanesulfonic acid
HPLC - high-performance (pressure) liquid chromatography
i.d. - inside diameter
Ig - immunoglobulin (when used to identify a specific immunoglobulin)
IGF - insulin-like growth factor
IGFBP - insulin-like growth factor-binding protein(s)
IL - interleukin
kb - kilobase(s)
LD50 - lethal dose 50%
LH - luteinizing
hormone
LHRH - luteinizing hormone-releasing hormone
ME - metabolizable energy
Misc. - miscellaneous
NAD - nicotinamide
adenine dinucleotide
NADH - reduced form of NAD
NDF - neutral detergent fiber
NDIN - neutral detergent insoluble nitrogen
NE - net energy
NEg - net energy for gain
NEl - net energy for lactation
NEm - net energy
for maintenance
NEFA - nonesterified fatty acid
No. - number (use only in tables, not in the text)
NRC - National Research
Council
o.d. - outside diameter
PAGE - polyacryl amide gel electrophoresis
PBS - phosphate-buffered saline
PCR - polymerase
chain reaction
PG - prostaglandin
PMSG - pregnant mare's serum gonadotropin
PPAR - peroxisome proliferator-activated receptor
PUFA - polyunsaturated fatty acid(s)
QTL - quantitative trait locus (loci)
REML - restricted maximal likelihood
RFLP - restriction
fragment length polymorphism
RIA - radioimmunoassay
RNA - ribonucleic acid
rpm - revolutions/minute (not to be used to indicate
centrifugal force)
RQ - respiratory quotient
SDS - sodium dodecyl sulfate
SFA - saturated fatty acid
SNP - single nucleotide
polymorphism
ssp. - subspecies
ST - somatotropin
spp. - species
SSC - Sus scrofa chromosome
TDN - total
digestible nutrients
TLC - thin layer chromatography
Tris - tris(hydroxymethyl)aminomethane
TSAA - total sulfur amino acids
USDA - US Department of Agriculture
UV - ultraviolet
VFA - volatile fatty acid(s)
vol - volume
vol/vol - volume/volume
(used only in parentheses)
vs. - versus
wt - weight (use only in tables, not in the text)
wt/vol - weight/volume (used only
in parentheses)
wt/wt - weight/weight (used only in parentheses)
Submission Checklist
It is hoped that this list will
be useful during the final checking of an article prior to sending it to the journal's Editor for review. Please consult this Guide for
Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding
Author
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been
uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further
considerations
• Manuscript has been "spellchecked" and "grammar-checked"
• References are in the correct format
for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission
has been obtained for use of copyrighted material from other sources (including the Web)
• color figures are clearly marked
as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced in color on the Web (free of charge)
and in black-and-white in print
• If only color on the Web is required, black and white versions of the figures are also supplied
for printing purposes
For any further information please visit our customer support site at http://epsupport.elsevier.com
.
AFTER ACCEPTANCE
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite
and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the
publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document,
particularly 'Articles in press' because they have not yet received their full bibliographic information.
The correct format for
citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs in PDF format will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post). Elsevier now sends PDF proofs which can be annotated; for this you will need to download Adobe Reader version
7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate
PDF files will accompany the proofs. The exact system requirements are given at the Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of
your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections
cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article
if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article
via e-mail. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and
a disclaimer outlining the terms and conditions of use.
AUTHOR INQUIRIES
For inquiries relating to the submission of articles
(including electronic submission where available) please visit this journal's homepage. You can track accepted articles at http://www.elsevier.com/trackarticle
and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright,
frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating
to proofs, will be provided by the publisher.
Updated August 2009
|
| |
|
