« Previous
Next »
Current Orthopaedics
Volume 20, Issue 1
, Pages 32-40
, February 2006
(v) Biotribology
References
- . Bio-tribology. In: Proceedings of the conference on the rheology of lubrication. The Institute of Petroleum, The Institution of Mechanical Engineers and the British Society of Rheology; 1973;p. 81–88
- Tooth wear: attrition, erosion, and abrasion. Quintessence Int. 2003;34(6):435
- Wear of dental resin composites: insights into underlying processes and assessment methods—a review. J Biomed Mater Res. 2003;65B(2):280
- . Tribology and the skin structure. In: Berardesca E, et al. editor. Bioengineering of skin: methods and instrumentation, Part III: General aspects. Boca Raton, FL: CRC Press; 1995;p. 159
- Coefficient of friction: tribological studies in man—an overview. Skin Res Technol. 2003;9(3):227
- Measurement of slipperiness: fundamental concepts and definitions. Ergonomics. 2001;44(13):1102
- . Tribology: preventing slips and falls in the workplace. Occup Health Saf. 2002;71(9):134
- . Advances in ocular tribology. Adv Exp Med Biol. 1994;350:275
- . Blood flow and red blood cell deformation in nonuniform capillaries: effects of the endothelial surface layer. Microcirculation. 2002;9(3):189
- In-vitro assessment of the wear development mechanism and stabilization of wear in the Edwards MIRA/Sorin Bicarbon mechanical heart valve orifice ring. J Heart Valve Dis. 2002;11(3):409
- The analysis, design, and testing of a blood lubricated hydrodynamic journal bearing. ASAIO J. 1997;43(5):M556
- . Wear and corrosion of sliding counterparts of stainless-steel hip screw-plates. Injury. 2000;31(2):85
- Elastohydrodynamic separation of pleural surfaces during breathing. Respir Physiol Neurobiol. 2003;137(1):97
- . Biomechanics of diarthrodial joints: a review of twenty years of progress. J Biomech Eng. 1993;115(4B):460
- . New joints for the Millennium: wear control in total replacement hip joints. Proc Inst Mech Eng J Eng Med. 2001;215(4):335
- . The role of macrophages in osteolysis of total joint replacement. Biomaterials. 2005;26(11):1271–1286
- . The effect of surface topography of retrieved femoral heads on the wear of UHMWPE sockets. Med Eng Phys. 1997;19(8):711–719
- . Introduction to the biomechancis of joints and joint replacements. London: Mechanical Engineering Publications Ltd; 1981;
- . Analysis of fluid film lubrication in artificial hip joint replacements with surfaces of high elastic modulus. Proc Inst Mech Eng J Eng Med. 1997;211:247–256
- . A hip joint simulator study of the performance of metal-on-metal joints: Part II: Design. J Arthroplasty. 2004;19(8, Suppl 3):24–30
- Influence of the clearance on in-vitro tribology of large diameter metal-on-metal articulations pertaining to resurfacing implants. Orthop Clin N Am. 2005;36:135–142
- . Subsurface microstructure of metal-on-metal hip joints and its relationship to wear particle generation. J Biomed Mater Res B Appl Biomater. 2005;15;72(1):206–214
- . Retrieval analysis of total knee prostheses: a method and its application to 48 total condylar prostheses. J Biomed Mater Res. 1978;17:829–842
PII: S0268-0890(05)00160-X
doi: 10.1016/j.cuor.2005.09.005
« Previous
Next »
Current Orthopaedics
Volume 20, Issue 1
, Pages 32-40
, February 2006

