Current Orthopaedics
Volume 20, Issue 1 , Pages 52-58 , February 2006

The thermal properties of bone and the effects of surgical intervention

References 

  1. Zelenov ES. Thermophysical properties of compact bone. Mech Compos Mater. 1985;21(6):1092–1095
  2. Lundskog J. Heat and bone tissue. An experimental investigation of the thermal properties of bone and threshold levels from thermal injury. Scand J Plast Reconstr Surg. 1972;6(Suppl):5–75
  3. Phillips ED. Greek medicine. London: Camelot Press Ltd; 1973;
  4. Gillies HD. The replacement and control of maxillofacial fractures. Br Dent Jt. 1941;71:351–359
  5. Anderson R, Finlayson BL. Sequelae of transfixation of bone. Surgery. 1943;13:46–54
  6. Abouzgia MB, James F. Temperature rise during drilling through bone. Int J Oral Maxfac Implants. 1997;12(3):342–352
  7. Kuhns JG, Hayes J, Stein M, Helwig EB. Laser injury in skin. Lab Invest. 1967;17:1
  8. Rymo L, Lagerkvist U, Wonacott A. Crystalisation of lysly transfer ribonucleic acid synthetase from yeast. J Biol Chem. 1970;245:4308
  9. Viidik A. Functional properties of collagenous tissues. International review of connective tissue research. vol. 4. New York: Academic Press; 1972;
  10. Eriksson RA. Heat induced bone tissue injury. Thesis, University of Gothenberg, Sweden.
  11. Eriksson RA, Albrektsson T. Temperature threshold levels for heat induced bone tissue injury. A vital microscopic study in rabbit. J Prosth Dent. 1983;50:101–107
  12. Ardan NI, Janes JM, Herrick JF. Ultrasonic energy and surgically produced defects in bone. J Bone Joint Surg. 1957;39A:394–402
  13. Rouiller C, Majno G. Morphologische und Chemische Untersuchungen an knochen nach hitzecinwirkung. Beitr Z Path. 1953;113:100–120
  14. Bonfield W, Li CH. The temperature dependence of the deformation of bone. J Biomech. 1968;1:323–329
  15. Mortiz AR, Henriques FC. Studies on thermal tissue injury III. The pathology and pathogenesis of cutaneous burns. An experimental study. Am J Path. 1947;23:915
  16. Leach EH, Peters RA, Rossiter RJ. Experimental thermal burns, ecspecially the moderate temperature burn. Q J Exp Physiol. 1943;32:67
  17. Bachus KN, Rondina MT, Hutchinson DT. The effects of drilling force on cortical temperatures and their duration. An in vitro study. Med Eng Phys. 2000;22:685–691
  18. Mathews LS, Hirsch C. Temperature measured in human cortical bone when drilling. J Bone Joint Surg. 1972;54(A):297–308
  19. Krause WR, Bradbury DW, Kelly JE, Lunceford EM. Temperature elevations during orthopaedic cutting operations. J Biomech. 1982;15:267–275
  20. Saha S, Pal S, Albright JA. Surgical drilling: design and performance of an improved drill. J Biomec Eng. 1982;104:245–252
  21. Kronenberg M. Machining science and application—theory and practice for operations and development of machining process, 1st ed. Oxford: Pergamon Press, p. 53.
  22. Albright JA, Johnson TR, Saha S. In:  Ghista DN, Raof  editor. Principles of internal fixation in orthopaedic mechanics; procedures and devices. New York: Academic Press; 1978;p. 124–229
  23. Thompson HC. Effect of drilling into bone. J Oral Surg. 1958;16:22–30
  24. Pallen FG. Histologic changes in bone after insertion of skeletal fixation pins. J Oral Surg Aneasth Hosp Dent Serv. 1960;18:400–408
  25. Rafel SS. Temperature changes during high speed drilling on bone. J Oral Surg Aneasth Hosp Dent Serv. 1962;20:475–477
  26. Eichler J, Berg R. Temperatureinwirkung auf die Kompakta beim Bohren. Gewindeschneiden und Eindrehen von Schrauben. Z Orthop. 1972;110:909–913
  27. Jacobs RL, Ray RD. The effect of heat on bone healing. A disadvantage in the use of power tools. Arch Surg. 1972;104:687–691
  28. Tetsch P. Development of raised temperature after osteotomies. J Maxillofac Surg. 1974;2:141–145
  29. Lavelle C, Wedgewood D. Effect of internal irrigation on frictional heat generated from bone drilling. J Oral Surg. 1980;38:499–503
  30. Pal S, Saha S. Effect of cutting speeds on temperature during drilling of bone. Proc Am Coll Eng Med Biol. 1981;23:289
  31. Eriksson RA, Albrektsson T, Albrektsson B. Heat caused by cortical one drilling. Temperatures measured in vivo inpatients and animals. Acta Othop Scand. 1984;55:629–631
  32. Mathews LS, Green CA, Goldstine SA. The thermal effects of skeletal fixation pin insertion in bone. J Bone Joint Surg. 1984;66(A):1077–1083
  33. Eriksson RA, Adell R. Temperature during drilling for placement of implants using osseointegration technique. J Oral Maxillofac Surg. 1986;44:4–7
  34. Wiggins KL. Machining of bone. Thesis, Austin, TX: University Texas; 1974.
  35. Wiggins KL, Malkin S. Orthogonalmachining of bone. J Biomech Eng. 1978;100:122–130
  36. Henschel CJ. Heat impact of revolving instruments on vital dentin tubules. J Dent Res. 1943;22:323–333
  37. Peyton FA. Temperature rise and cutting efficiency of rotating instruments. NY Dent J. 1952;18:439–450
  38. Hobkirk JA, Rusiniak K. Investigation of variable factors in drilling bone. J Oral Surg. 1977;35:968–973
  39. Mathews LS, Green CA, Goldstine SA. The thermal effects of skeletal fixation pin insertion in bone. J Bone Joint Surg. 1984;66(A):1077–1083
  40. Natali C, Ingle I, Dowell J. Orthopaedic bone drills—can they be improved?. J Bone Joint Surg. 1996;78B:357–362
  41. Kondo S, Yoshikazu O, Iseki H, Hori T, Takakura K, Kobayashi A, et al. Thermological study of drilling bone tissue with a high speed drill. Neusosurgery. 2000;46(5):1162–1167
  42. Folkow B, Neil E. Circulation. New York: Oxford University Press; 1971;
  43. Moritz AR. Studies of thermal injury III. The pathology and pathogenesis of cutaneous burns. An experimental study. Am J Path. 1947;23:695

PII: S0268-0890(05)00167-2

doi: 10.1016/j.cuor.2005.09.011

Current Orthopaedics
Volume 20, Issue 1 , Pages 52-58 , February 2006

Article Tools